|
Asphalt Roofing Felt |
ASTM D226 II, Type30 ASTM D4869 Type I and Type II |
Product Specs:
ASTM D226 II, Type30 |
|
| Width of roll(mm): | 914+-0.7% * |
| Area of roll, min.(m2): | 20.07 (214 sq. ft.) |
| Moisture, at point of manufacture, max.%: | 4.1 |
| Net mass of saturated felt, min.(g/m2): | 1270 |
| Mass of saturant, min. (g/m2): | 732 |
| Mass of desaturated felt, min. (g/m2): | 488 |
| Ash, max.%: | 10 |
| Weight per roll, min.(kg.): | 25.5 (56.1 lb.) |
| Loading: | 700 rolls with pallet in a 20' container ** |
| Quantity available: | 200 20' containers per month |
*or as agreed upon by purchaser and seller
**17.5 metric tons
ASTM D4869 |
Type I | Type II |
Tear strength, 73+-4 degree F, min, N: |
2.0 | 4.0 |
| Pliability at 73+-4 degree F. Ten strips tested shall not crack when bent 90 degree at a uniform speed over a rounded corner of radius in table for each type: |
0.50 in. | 0.75 in. |
| Loss on heating at 221 degree F for 5 h. max, %: | 6 | 6 |
| Liquid water transmission test: | pass | pass |
| Width of the roll, in.: | 36+-0.7% | 36+-0.7% |
| Area of the roll, square foot, min.: | 432 | 216 |
| Net mass of saturated felt, lb/100 ft2, min.: | 8.0 | 20 |
| Net mass of saturant, lb/100ft2, min.: | 4.0 | 10.8 |
| Net mass of desaturated felt, lb/100ft2, min.: | 4.0 | 9.0 |
| Saturation, % by wt., min.: | 100 | 140 |
| Moisture, % by wt., min.: | 2.0 | 2.0 |
| Saturating efficiency, % by wt., min.: | 75 | 70 |
A4 size samples available upon request
For businesses interested in buying this product, please consider it should be high-volume
Price goes down as volume goes up
Sample container available
Please email info@ees.net.nz for ordering information.
